10931.1000
Post base system 10930/10931 with thread M24 Adjustment range: 170 - 285 mm
Technical specifications:
| Upper part dimensions | Ø 100 x 8 mm |
| Upper part holes | 4 St Ø 12 mm |
| Upper part mandrel | Rohr M44 x 130 mm |
| Upper part thread | M24 x 150 mm |
| Lower part dimensions | 160 x 100 x 8 mm |
| Lower part holes | 4 St Ø 13 mm |
| Lower part thread | M24 x 65 mm |
| Max. characteristic load-bearing capacity in compression/tension for steel | 92,0 kN* / 13,2 kN* |
| Max. characteristic load-bearing capacity in compression/tension for timber | 120,0 kN / 50,0 kN |
Product information
The leading post base series for joinery stations and carpenters. A versatile post base system accepting compressive, tensile and transverse forces. Height-adjustable even when installed and under heavy load. The use of additional lock nuts increases the rigidity of the connection.
Mounting instructions
Bei Pfostenträgern mit Rohrgewinde M 44 mit Bohrer Art. Nr. 50938.0000 Ø 42,5 mm (Abbundanlage Ø 43,5 mm) ein Loch 130 mm in das Hirnholz bohren. Das Rohrgewinde kann per Hand oder mit einem Schlagschrauber in das Hirnholz eingedreht und mit 4 Tellerkopf-Schrauben Ø 10 x 120 mm Vollgewinde befestigt werden. Kein zusätzliches Montagewerkzeug nötig!
Alternativ: Das Rohrgewinde kann bei einer Vorbohrung von Ø 44 mm auch eingesteckt werden. Obere Gewindestange (M 24 x 150 mm rechts) wird durch die obere Platte geschraubt und mit Mutter gesichert. Dadurch ist eine Grobeinstellung von 50 mm und eine Feineinstellung nach fertiger Montage über die rechts/links Muffe bis zu 65 mm möglich (komplette stufenlose Verstellbarkeit von 115 mm).
Skip product gallery
Ähnliche Artikel
10529.1090
Bottom plate:
Rectangular
|
Color:
Grey
|
Installation height:
141 – 201 mm
Turn – click: the innovative post support system with centring tip
The Pitzl plug-in system makes installation an effortless process. The components can be optimally pre-assembled in advance, so that only a few steps are required on site: plug in, snap into place – done. This not only reduces installation time, but also the need for tools, labour and personnel resources.
Thanks to coordinated material thicknesses, the system ensures maximum load-bearing capacity against compressive, tensile and transverse forces. Height adjustment is also possible when installed and under high loads.
*Further static values can be found in our static book and in ETA 10/0413.
10529.1093
Heavy-duty version:
✔
|
Installation height:
149 - 209 mm
Heavy-duty-version
Turn – click: the innovative post support system with centring tip
The Pitzl plug-in system makes installation an effortless process. The components can be optimally pre-assembled in advance, so that only a few steps are required on site: plug in, snap into place – done. This not only reduces installation time, but also the need for tools, labour and personnel resources.
Thanks to coordinated material thicknesses, the system ensures maximum load-bearing capacity against compressive, tensile and transverse forces. Height adjustment is also possible when installed and under high loads.
*Further static values can be found in our static book and in ETA 10/0413.
Skip product gallery
Zubehör
10529.1090
Bottom plate:
Rectangular
|
Color:
Grey
|
Installation height:
141 – 201 mm
Turn – click: the innovative post support system with centring tip
The Pitzl plug-in system makes installation an effortless process. The components can be optimally pre-assembled in advance, so that only a few steps are required on site: plug in, snap into place – done. This not only reduces installation time, but also the need for tools, labour and personnel resources.
Thanks to coordinated material thicknesses, the system ensures maximum load-bearing capacity against compressive, tensile and transverse forces. Height adjustment is also possible when installed and under high loads.
*Further static values can be found in our static book and in ETA 10/0413.
SW10000
Werkstoffeigenschaften
Prüfverfahren
NB
Statischer Einsatzbereich1 in N/mm²
0,075
Lastspitzen1 in N/mm²
2,00
Mechanischer Verlustfaktor
DIN 53513 2
0,07
Rückprallelastizität in %
EN ISO 8307
70
Druckverformungsrest3 in %
EN ISO 1856
< 5
Statischer Elastizitätsmodul1 in N/mm²
0,75
Dynamischer Elastizitätsmodul1 in N/mm²
DIN 535132
0,90
Statischer Schubmodul1 in N/mm²
DIN ISO 18272
0,13
Dynamischer Schubmodul1 in N/mm²
DIN ISO 18272
0,18
Min. Bruchspannung Zug in N/mm²
DIN EN ISO 527-3/5/1002
0,75
Min. Bruchdehnung Zug in %
DIN EN ISO 527-3/5/1002
450
Abrieb3 in mm³
DIN EN ISO 4649
1.400
Reibungskoeffizient (Stahl)
Getzner Werkstoffe
≥ 0,7
Reibungskoeffizient (Beton)
Getzner Werkstoffe
≥ 0,7
Spezifischer Durchgangswiderstand in Ω · cm
DIN IEC 60093
> 1010
Wärmeleitfähigkeit in W/mK
DIN EN 12667
0,060
Einsatztemperatur in °C
-30 bis 70
Temperaturspitze in °C
kurzzeitig 4
120
Brandverhalten
EN ISO 11925-2
Klasse E/EN 13501-1
10529.1093
Heavy-duty version:
✔
|
Installation height:
149 - 209 mm
Heavy-duty-version
Turn – click: the innovative post support system with centring tip
The Pitzl plug-in system makes installation an effortless process. The components can be optimally pre-assembled in advance, so that only a few steps are required on site: plug in, snap into place – done. This not only reduces installation time, but also the need for tools, labour and personnel resources.
Thanks to coordinated material thicknesses, the system ensures maximum load-bearing capacity against compressive, tensile and transverse forces. Height adjustment is also possible when installed and under high loads.
*Further static values can be found in our static book and in ETA 10/0413.