HVP steel / concrete connections
Our system offers a sophisticated solution for steel and concrete connections: an anchor plate is firmly anchored in the substrate using approved concrete anchors. The actual timber connection is made as usual using a tried-and-tested HVP connector. The load-bearing capacity of the concrete part (anchor and concrete) must be verified separately. HVP connectors for steel/concrete connections are automatically supplied with lift-off protection.
88210.3000
Height:
100 mm
|
Thickness:
18 mm
Equally sturdy and simple HVP connection to concrete or steel up to about 300 kN. An anchor plate with concrete anchors ensures that the forces are applied properly into the concrete element. The secondary joist connection is realised with a normal HVP connector part.
88214.3000
Height:
140 mm
|
Thickness:
18 mm
Concrete connection: Equally sturdy and simple HVP connection to concrete or steel up to about 300 kN. An anchor plate with concrete anchors ensures that the forces are applied properly into the concrete element. The secondary joist connection is realised with a normal HVP connector part.
88318.3000
Height:
180 mm
|
Thickness:
18 mm
Concrete connection: Equally sturdy and simple HVP connection to concrete or steel up to about 300 kN. An anchor plate with concrete anchors ensures that the forces are applied properly into the concrete element. The secondary joist connection is realised with a normal HVP connector part.
88322.3000
Height:
220 mm
|
Thickness:
18 mm
Concrete connection: Equally sturdy and simple HVP connection to concrete or steel up to about 300 kN. An anchor plate with concrete anchors ensures that the forces are applied properly into the concrete element. The secondary joist connection is realised with a normal HVP connector part.
88420.3000
Height:
200 mm
|
Thickness:
25 mm
A further quality criterion of the Pitzl HVP connectors series is the anodisation. Beside a smooth-running assembly and a dirty-free surface it provides the Pitzl HVP a very beautiful look.
88430.3000
Height:
300 mm
|
Thickness:
25 mm
A further quality criterion of the Pitzl HVP connectors series is the anodisation. Beside a smooth-running assembly and a dirty-free surface it provides the Pitzl HVP a very beautiful look.
88440.3000
Height:
400 mm
|
Thickness:
25 mm
A further quality criterion of the Pitzl HVP connectors series is the anodisation. Beside a smooth-running assembly and a dirty-free surface it provides the Pitzl HVP a very beautiful look.
88450.3000
Height:
500 mm
|
Thickness:
25 mm
A further quality criterion of the Pitzl HVP connectors series is the anodisation. Beside a smooth-running assembly and a dirty-free surface it provides the Pitzl HVP a very beautiful look.
88460.3000
Height:
600 mm
|
Thickness:
25 mm
A further quality criterion of the Pitzl HVP connectors series is the anodisation. Beside a smooth-running assembly and a dirty-free surface it provides the Pitzl HVP a very beautiful look.