88440.3000
Standard connector for wood-concrete/steel connection Dimension: 150 x 400 x 25 mm
Technical specifications:
| Minimum timber dimensions with screws Ø8x160mm on the secondary beam | 140 x 420 mm |
| VPE | 4 |
| Connector height | 400 mm |
| Connector thickness (assembled) | 25 mm |
| Connector width, main beam section | 150 mm |
| Connector width, secondary beam section | 120 mm |
| Number of concrete anchors for main beam section | 4 |
| Screws for secondary beam section | 16 St. Ø 8 x 100 - 240 |
Product information
A further quality criterion of the Pitzl HVP connectors series is the anodisation. Beside a smooth-running assembly and a dirty-free surface it provides the Pitzl HVP a very beautiful look.
Technical data:
| Geometrie [mm] | Ø Bohrung [mm] | Anzahl Anker/Schraube | Ankertyp | Bauteildicke [mm] | Bemessungswert der Einwirkung in Einschubrichtung [kN] | Schraube 8.8 | Injektionsbohrung | |||||
| B | H | D | F2,Rd, Beton | F2,Rd, Stahl | ||||||||
| 150 | 400 | 20 | 14 | 4 | FBS II 10x120 65,55,35 SK | 155 | 76,7 | 129,5 | M12 | Nein | ||
| FH II 12/25 SK | 125 | 66,3 | Nein | |||||||||
| MMS-Plus F 12x120/30 | 150 | 61,6 | Nein | |||||||||
* further static values can be found in our static logbook or the ETA 15/0187
Mounting instructions
Skip product gallery
Accesoires
50934.2000
Grooving cutter
These combinations are essential for a optimum milling grove. The exact milling texture for the respective connector is obtained. Therefore a quick installation of our connectors without an additional calibration is feasible.
In combination with our milling templates (page 115) you can also mill in the upper parts of our post bases.
58396.0000
Accessories for the milling device
Collet holder without collet
Appropriate for milling device Scheer HM 14.
58400.0000
Milling and assembly templates for all connector sizes of HVP series.
The flexible and easily adjustable templates enable a quick adjustment of connector width.
Following correct adjustment, milling and assembly works can begin without any further adaptation being required.
99812.0100
Length:
100 mm
|
Thickness:
12 mm
Fischer high-performance anchor FH ll 12/25 SK
For connectors with Item No. 88210.3000 - 88322.3000
