88318.3000
Standard connector for wood-concrete/steel connection Dimension: 80/110 x 100 x 18 mm
Technical specifications:
| Minimum wood dimensions with screws Ø5x60mm on the secondary beam | 100 x 200 mm |
| VPE | 4 |
| Connector height | 180 mm |
| Connector thickness (assembled) | 18 mm |
| Connector width, main beam section | 110 mm |
| Connector width, secondary beam section | 80 mm |
| Number of concrete anchors for main beam section | 4 |
| Screws for secondary beam section | 17 St. Ø5 x 60 - 120 mm |
Product information
Concrete connection: Equally sturdy and simple HVP connection to concrete or steel up to about 300 kN. An anchor plate with concrete anchors ensures that the forces are applied properly into the concrete element. The secondary joist connection is realised with a normal HVP connector part.
Technical data:
| Geometrie [mm] | Ø Bohrung [mm] | Anzahl Anker/Schraube | Ankertyp | Bauteildicke [mm] | Bemessungswert der Einwirkung in Einschubrichtung [kN] | Schraube 8.8 | Injektionsbohrung | |||||
| B | H | D | F2,Rd, Beton | F2,Rd, Stahl | ||||||||
| 110 | 180 | 15 | 13 | 4 | FBS II 10x100 45,35,15 SK | 140 | 54,3 | 129,5 | M12 | Nein | ||
| FH II 12/15 SK | 120 | 48,8 | Nein | |||||||||
| MMS-Plus F 12x120/30 | 150 | 58,4 | Nein | |||||||||
* further static values can be found in our static logbook or the ETA 15/0187
Mounting instructions
Skip product gallery
Accesoires
50934.2000
Grooving cutter
These combinations are essential for a optimum milling grove. The exact milling texture for the respective connector is obtained. Therefore a quick installation of our connectors without an additional calibration is feasible.
In combination with our milling templates (page 115) you can also mill in the upper parts of our post bases.
58396.0000
Accessories for the milling device
Collet holder without collet
Appropriate for milling device Scheer HM 14.
99812.0090
Length:
90 mm
|
Thickness:
12 mm
Fischer high-performance anchor FH ll 12/15 SK
For connectors with Item No. 88210.3000 - 88322.3000
