Technical specifications:
| Max. stroke | 60 mm |
| Rotational speed | 1800 |
| Revolver stop | 3x |
| Net weight | 4,7 Kg |
| Performance | 1200 Watt |
| thread | M10 |
Product information
The Scheer hand overhead router HM 14 is suitable for moderately difficult milling works and is ideal for milling metal mount. It is equipped with a universal motor for light flux.
Downloads
Mounting instructions
Skip product gallery
Accesoires
50934.1000
Grooving cutter
These combinations are essential for a optimum milling grove. The exact milling texture for the respective connector is obtained. Therefore a quick installation of our connectors without an additional calibration is feasible.
In combination with our milling templates (page 115) you can also mill in the upper parts of our post bases.
50934.2000
Grooving cutter
These combinations are essential for a optimum milling grove. The exact milling texture for the respective connector is obtained. Therefore a quick installation of our connectors without an additional calibration is feasible.
In combination with our milling templates (page 115) you can also mill in the upper parts of our post bases.
58395.1000
Accessories for the Scheer HM 14 milling device
A guide bush Ø 30 mm and a milling cutter Ø 20 mm are required to achieve an accurate milling cut-out.
This combination is required for an optimum cut-out. It results in the accurate milling surface for the corresponding connector. This enables fast assembly without the need to additionally calibrate our connectors.
58396.0000
Accessories for the milling device
Collet holder without collet
Appropriate for milling device Scheer HM 14.
