Milling unit and accessories
Groove cutters, milling drills, milling templates & more.
50934.1000
Grooving cutter
These combinations are essential for a optimum milling grove. The exact milling texture for the respective connector is obtained. Therefore a quick installation of our connectors without an additional calibration is feasible.
In combination with our milling templates (page 115) you can also mill in the upper parts of our post bases.
50934.2000
Grooving cutter
These combinations are essential for a optimum milling grove. The exact milling texture for the respective connector is obtained. Therefore a quick installation of our connectors without an additional calibration is feasible.
In combination with our milling templates (page 115) you can also mill in the upper parts of our post bases.
58390.0000
Easy handling, precise and fast.
Thanks to its compact build, the milling device can be applied in all main and secondary joist connections for all HVP sizes with 12 mm thickness. It ensures accurate milling for the connectors through harmonised components. Linear guides enable an absolutely clean and accurate milling cut-out. The eccentric clamping device allows for fast and precise fastening. The ergonomic design makes for comfortable and time-saving work.
58391.0000
The Scheer hand overhead router HM 14 is suitable for moderately difficult milling works and is ideal for milling metal mount. It is equipped with a universal motor for light flux.
58392.0000
Accessories for the Scheer HM 14 milling device
A guide bush Ø 30 mm and a milling cutter Ø 20 mm are required to achieve an accurate milling cut-out.
This combination is required for an optimum cut-out. It results in the accurate milling surface for the corresponding connector. This enables fast assembly without the need to additionally calibrate our connectors.
58395.1000
Accessories for the Scheer HM 14 milling device
A guide bush Ø 30 mm and a milling cutter Ø 20 mm are required to achieve an accurate milling cut-out.
This combination is required for an optimum cut-out. It results in the accurate milling surface for the corresponding connector. This enables fast assembly without the need to additionally calibrate our connectors.
58396.0000
Accessories for the milling device
Collet holder without collet
Appropriate for milling device Scheer HM 14.
58399.0000
The milling unit is composed of the following items:
- Milling template item no. 58390.0000
- Scheer hand overhead router item no. 58391.0000
- Milling bit item no. 58392.0000