10920.1490
Post base Right / left threaded with thread M24 Adjustment range: 327 - 392 mm
Technical specifications:
| Installation height mm | 327 - 392 |
| Maximum characteristic load-bearing capacity (kN) * | 120,0 |
| Bottom plate mm | 160 x 100 x 6 |
| M 24 thread at the bottom | 250 |
| M 24 thread at the top | 65 |
| Bore Ø 13 mm at the bottom | 4 |
| Upper plate mm | Ø 96 x 6 |
| 10.5 mm hole at the top | 4 |
Product information
A system for all applications! Threads of 20 to 30 mm and the most varied plate sizes with 6 to 15 mm material thickness - we have the perfect solution for any application. Lift-off and lateral impacts can be counteracted with a straight screw connection into the cross-grained wood using fully-threaded 10 x 120 mm wood screws (with European Technical Approval) or a strut or lateral latches. Of course, post bases of the right/left-threaded system are still height-adjustable when mounted and under heavy load. The use of additional lock nuts increases the rigidity of the connection.
Mounting instructions
Skip product gallery
Accesoires
50934.2000
Grooving cutter
These combinations are essential for a optimum milling grove. The exact milling texture for the respective connector is obtained. Therefore a quick installation of our connectors without an additional calibration is feasible.
In combination with our milling templates (page 115) you can also mill in the upper parts of our post bases.
58000.0000
Milling and assembly templates for all connector sizes of HVP series.
The flexible and easily adjustable templates enable a quick adjustment of connector width.
Following correct adjustment, milling and assembly works can begin without any further adaptation being required.
