| Upper part dimensions | Ø 96 x 8 mm |
| Upper part holes | 4 St. Ø 10,5 mm |
| Lower part dimensions | 160 x 100 x 8 mm |
| Lower part holes | 4 St. Ø 13 mm |
| Lower part thread | M24 x 55 mm |
| Adjustment range | 99 - 119 mm |
| Max. characteristic load-bearing capacity in compression/tension for steel | 104,0* / 36,9* kN |
| Max. characteristic load-bearing capacity in compression/tension for timber | 152,0 / 50,0 kN |
Product information
Turn – click: the innovative post support system with centring tip
The Pitzl plug-in system makes installation an effortless process. The components can be optimally pre-assembled in advance, so that only a few steps are required on site: plug in, snap into place – done. This not only reduces installation time, but also the need for tools, labour and personnel resources.
Thanks to coordinated material thicknesses, the system ensures maximum load-bearing capacity against compressive, tensile and transverse forces. Height adjustment is also possible when installed and under high loads.
*Further static values can be found in our static book and in ETA 10/0413.
The post bracket is pre-assembled in the workshop, ensuring quick and convenient work on the construction site. Pitzl's innovative plug-in system can be locked and unlocked quickly and easily. The head plate can be separated from the rest of the post bracket in just a few simple steps.
- Turn the lock counterclockwise until it stops.
- Press the lock downwards.
- Continue turning the lock counterclockwise until it stops.
Accesoires
Schrauben
