Technical specifications:
| Dimensions W x H x D (mm) | 40 x 70 x 12 |
| Number of screws | 10 |
| Usable screw size | Ø4,5 x 50 - 80 mm |
| Minimum timber dimensions with screws Ø4,5x50 mm on the secondary beam | 50** x 80 mm |
| Minimum timber dimensions with screws Ø4,5x50mm on the main beam | 60 x 80 mm |
| Characteristic load-bearing capacity* in the insertion direction with screws Ø4,5x50 mm | 7,18 kN |
| Characteristic load-bearing capacity* in the insertion direction with screws Ø4,5x80 mm | 11,46 kN |
| VPE | 10 |
Product information
Optimal distances to the edges and variable screws length ensure accuracy of fit for each timber section.
Technical data:
| Effektive Gewindelänge (ℓef) | Mindestquerschnitt (mm) | Charakteristische Tragfähigkeit Rk (kN) | |||||||||||||
| Vollholz C24 (ρk = 350 kg/m³) | Brettschichtholz GL24h (ρk = 385 kg/m³) | ||||||||||||||
| HT | NT | NT | HT | NT | HT | ||||||||||
| Schrauben | ℓef (mm) | Höhe | Breite | Höhe | Breite | F2,Rk | F3,Rk | F4,Rk | F4,Rk | F1,Rk | F2,Rk | F3,Rk | F4,Rk | F4,Rk | F1,Rk |
| 4,5x50 mm | 44 mm | 80 | 60 | 80 | 50 | 6,65 | - | 6,26 | 9,89 | 6,01 | 7,18 | - | 6,56 | 10,38 | 6,49 |
| 4,5x60 mm | 54 mm | 90 | 70 | 90 | 50 | 8,00 | - | 6,26 | 9,89 | 7,23 | 8,63 | - | 6,56 | 10,38 | 7,80 |
| 4,5x80 mm | 74 mm | 110 | 90 | 110 | 50 | 10,62 | - | 6,26 | 9,89 | 9,59 | 11,46 | - | 6,56 | 10,38 | 10,35 |
* further static values can be found in our static logbook or the ETA 15/0187
Mounting instructions
Skip product gallery
Accesoires
50934.1000
Grooving cutter
These combinations are essential for a optimum milling grove. The exact milling texture for the respective connector is obtained. Therefore a quick installation of our connectors without an additional calibration is feasible.
In combination with our milling templates (page 115) you can also mill in the upper parts of our post bases.
58000.0000
Milling and assembly templates for all connector sizes of HVP series.
The flexible and easily adjustable templates enable a quick adjustment of connector width.
Following correct adjustment, milling and assembly works can begin without any further adaptation being required.
58396.0000
Accessories for the milling device
Collet holder without collet
Appropriate for milling device Scheer HM 14.
58399.0000
The milling unit is composed of the following items:
- Milling template item no. 58390.0000
- Scheer hand overhead router item no. 58391.0000
- Milling bit item no. 58392.0000
