Technical specifications:
| Dimensions W x H x D (mm) | 160 x 220 x 12 |
| Number of screws | 84 |
| Usable screw size | Ø5 x 60 - 120 mm |
| VPE | 4 |
Available, delivery time: Instant download
Product information
Technical data:
| Effektive Gewindelänge (ℓef) | Mindestquerschnitt (mm) | Charakteristische Tragfähigkeit Rk (kN) | |||||||||||||
| Vollholz C24 (ρk = 350 kg/m³) | Brettschichtholz GL24h (ρk = 385 kg/m³) | ||||||||||||||
| HT | NT | NT | HT | NT | HT | ||||||||||
| Schrauben | ℓef (mm) | Höhe | Breite | Höhe | Breite | F2,Rk | F3,Rk | F4,Rk | F4,Rk | F1,Rk | F2,Rk | F3,Rk | F4,Rk | F4,Rk | F1,Rk |
| 5x60 mm | 54 mm | 240 | 70 | 240 | 180 | - | - | - | - | 126,81 | 21,80 | 65,50 | 103,56 | 41,10 | |
| 5x80 mm | 74 mm | 270 | 90 | 270 | 180 | - | - | - | - | 168,39 | 21,80 | 65,50 | 103,56 | 54,57 | |
| 5x100 mm | 94 mm | 300 | 110 | 300 | 180 | - | - | - | - | 208,85 | 21,80 | 65,50 | 103,56 | 67,68 | |
| 5x120 mm | 114 mm | 330 | 130 | 330 | 180 | - | - | - | - | 248,44 | 21,80 | 65,50 | 103,56 | 80,52 | |
* further static values can be found in our static logbook or the ETA 15/0187
Mounting instructions
Skip product gallery
Accesoires
50934.2000
Grooving cutter
These combinations are essential for a optimum milling grove. The exact milling texture for the respective connector is obtained. Therefore a quick installation of our connectors without an additional calibration is feasible.
In combination with our milling templates (page 115) you can also mill in the upper parts of our post bases.
58396.0000
Accessories for the milling device
Collet holder without collet
Appropriate for milling device Scheer HM 14.
