Before you start working, read the assembly instruction carefully
Step 2
Check whether the supplied materials fit your installation plan.
Make sure about the exact location of the elastomers.
Step 3
Prepare the substrate according to the design specifications (eg setting bar) and mark the storage positions.
Step 4
Cut materials to the desired length according to the layout or installation plan.
Step 5
Optionally, the bearings can now be fixed with spray adhesive or mechanically to prevent slippage during the displacement process of the wood elements.
Attention: Mechanical fasteners must be at least 3 mm below the material surface
Step 6
Laying the bearings according to the installation plan. The bearings can be stumped.
Attention: airtightness is only given for a clean installation.
Step 7
Moving the wood elements
Attention: If the elastomers are not fastened, care should be taken when shifting that the bearings are not displaced.
Step 8
Strong connections between the decoupled elements must also be decoupled. (eg GePi 240)
Step 9
Fittings must be pre-drilled. To decouple the screw use elastic washers.
Step 10
It is also important to ensure a continuous separation or elastic decoupling of the adjacent components (facade, eave plate).
Attention: Continuous elements can create secondary sound paths.
Step 11
Repeat this procedure on all other outstanding levels
We use cookies to provide functionality on our websites, to personalize function for your convinience, to provide social media features, and to compile access statistics. Various techniques may be used to share information about your use of our site with our social media and advertising partners. For more information, please see our Privacy Policy.